vmctl: qcow2 imagefile created
VM created for username!
ok
ok
ok
ok
host$ doas vmctl console username
Connected to /dev/ttypm (speed 115200)
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? i
At any prompt except password prompts you can escape to a shel
l by
typing '!'. Default answers are shown in []'s and are selected
by
pressing RETURN. You can exit this program at any time by pre
ssing
Control-C, but this can leave your system in an inconsistent s
tate.
Terminal type? [vt220]
System hostname? (short form, e.g. 'foo') username
Available network interfaces are: vio0 vlan0.
Which network interface do you wish to configure? (or 'done')
[vio0]
IPv4 address for vio0? (or 'autoconf' or 'none') [autoconf] 38
.87.162.179
Netmask for vio0? [255.255.255.0]
IPv6 address for vio0? (or 'autoconf' or 'none') [none] 2602:f
ccf:1:1179::
IPv6 prefix length for vio0? [64] 48
Available network interfaces are: vio0 vlan0.
Which network interface do you wish to configure? (or 'done')
[done]
Default IPv4 route? (IPv4 address or none) 38.87.162.1
add net default: gateway 38.87.162.1
1) none
IPv6 default router? (list #, IPv6 address or 'none') 2602:fcc
f:1::1
add net default: gateway 2602:fccf:1::1
DNS domain name? (e.g. 'example.com') [my.domain] host.thunder
irc.net
DNS nameservers? (IP address list or 'none') [none] 8.8.8.8
Password for root account? (will not echo)
Password for root account? (again)
Passwords do not match, try again.
Password for root account? (will not echo)
Password for root account? (again)
Start sshd(8) by default? [yes]
Change the default console to com0? [yes]
Available speeds are: 9600 19200 38400 57600 115200.
Which speed should com0 use? (or 'done') [115200]
Setup a user? (enter a lower-case loginname, or 'no') [no] mel
fa
Full name for user username? [username]
Password for user username? (will not echo)
Password for user username? (again)
WARNING: root is targeted by password guessing attacks, pubkey
s are safer.
Allow root ssh login? (yes, no, prohibit-password) [no]
What timezone are you in? ('?' for list) [US/Eastern]
Available disks are: sd0.
Which disk is the root disk? ('?' for details) [sd0]
No valid MBR or GPT.
Use (W)hole disk MBR, whole disk (G)PT or (E)dit? [whole]
Setting OpenBSD MBR partition to whole sd0...done.
The auto-allocated layout for sd0 is:
# size offset fstype [fsize bsize
cpg]
a: 634.6M 64 4.2BSD 2048 16384
1 # /
b: 1049.1M 1299648 swap
c: 20480.0M 0 unused
d: 895.3M 3448288 4.2BSD 2048 16384
1 # /tmp
e: 1339.9M 5281888 4.2BSD 2048 16384
1 # /var
f: 2469.1M 8025952 4.2BSD 2048 16384
1 # /usr
g: 674.7M 13082752 4.2BSD 2048 16384
1 # /usr/X11R6
h: 2477.7M 14464608 4.2BSD 2048 16384
1 # /usr/local
i: 1493.8M 19538944 4.2BSD 2048 16384
1 # /usr/src
j: 5507.7M 22598304 4.2BSD 2048 16384
1 # /usr/obj
k: 3931.5M 33877984 4.2BSD 2048 16384
1 # /home
Use (A)uto layout, (E)dit auto layout, or create (C)ustom layo
ut? [a]
/dev/rsd0a: 634.6MB in 1299584 sectors of 512 bytes
4 cylinder groups of 158.64MB, 10153 blocks, 20352 inodes each
/dev/rsd0k: 3931.5MB in 8051648 sectors of 512 bytes
20 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes eac
h
/dev/rsd0d: 895.3MB in 1833600 sectors of 512 bytes
5 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rsd0f: 2469.1MB in 5056800 sectors of 512 bytes
13 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes eac
h
newfs: reduced number of fragments per cylinder group from 863
60 to 85680 to enlarge last cylinder group
/dev/rsd0g: 674.7MB in 1381856 sectors of 512 bytes
5 cylinder groups of 167.34MB, 10710 blocks, 21440 inodes each
/dev/rsd0h: 2477.7MB in 5074336 sectors of 512 bytes
13 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes eac
h
/dev/rsd0j: 5507.7MB in 11279680 sectors of 512 bytes
28 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes eac
h
/dev/rsd0i: 1493.8MB in 3059360 sectors of 512 bytes
8 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rsd0e: 1339.9MB in 2744064 sectors of 512 bytes
7 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/sd0a (b8a4714aab650659.a) on /mnt type ffs (rw, asynchron
ous, local)
/dev/sd0k (b8a4714aab650659.k) on /mnt/home type ffs (rw, asyn
chronous, local, nodev, nosuid)
/dev/sd0d (b8a4714aab650659.d) on /mnt/tmp type ffs (rw, async
hronous, local, nodev, nosuid)
/dev/sd0f (b8a4714aab650659.f) on /mnt/usr type ffs (rw, async
hronous, local, nodev)
/dev/sd0g (b8a4714aab650659.g) on /mnt/usr/X11R6 type ffs (rw,
asynchronous, local, nodev)
/dev/sd0h (b8a4714aab650659.h) on /mnt/usr/local type ffs (rw,
asynchronous, local, nodev)
/dev/sd0j (b8a4714aab650659.j) on /mnt/usr/obj type ffs (rw, a
synchronous, local, nodev, nosuid)
/dev/sd0i (b8a4714aab650659.i) on /mnt/usr/src type ffs (rw, a
synchronous, local, nodev, nosuid)
/dev/sd0e (b8a4714aab650659.e) on /mnt/var type ffs (rw, async
hronous, local, nodev, nosuid)
Let's install the sets!
Location of sets? (cd0 disk http nfs or 'done') [cd0]
Pathname to the sets? (or 'done') [7.0/amd64]
Select sets by entering a set name, a file name pattern or 'al
l'. De-select
sets by prepending a '-', e.g.: '-game*'. Selected sets are la
belled '[X]'.
[X] bsd [X] comp70.tgz [X] xbase70.tgz [X]
xserv70.tgz
[X] bsd.rd [X] man70.tgz [X] xshare70.tgz
[X] base70.tgz [X] game70.tgz [X] xfont70.tgz
Set name(s)? (or 'abort' or 'done') [done]
Directory does not contain SHA256.sig. Continue without verifi
cation? [no] yes
Installing bsd 0%25 | |
Installing bsd 29%25 |******* | 627
Installing bsd 58%25 |*************** | 1241
Installing bsd 88%25 |********************** | 1868
Installing bsd 100%25 |**************************| 2109
0 KB 00:03
Installing bsd.rd 0%25 | |
Installing bsd.rd 100%25 |**************************| 410
9 KB 00:00
Installing base70.tgz 0%25 | |
Installing base70.tgz 0%25 | | 230
Installing base70.tgz 1%25 | | 448
Installing base70.tgz 2%25 | | 780
Installing base70.tgz 3%25 | | 1113
Installing base70.tgz 4%25 |* | 1433
Installing base70.tgz 5%25 |* | 1766
Installing base70.tgz 6%25 |* | 1958
Installing base70.tgz 7%25 |* | 2227
Installing base70.tgz 8%25 |** | 2521
Installing base70.tgz 9%25 |** | 2816
Installing base70.tgz 10%25 |** | 3148
Installing base70.tgz 11%25 |** | 3456
Installing base70.tgz 12%25 |*** | 3788
Installing base70.tgz 13%25 |*** | 4147
Installing base70.tgz 14%25 |*** | 4467
Installing base70.tgz 15%25 |*** | 4684
Installing base70.tgz 15%25 |*** | 4915
Installing base70.tgz 16%25 |**** | 5260
Installing base70.tgz 18%25 |**** | 5593
Installing base70.tgz 19%25 |**** | 5952
Installing base70.tgz 20%25 |***** | 6272
Installing base70.tgz 21%25 |***** | 6617
Installing base70.tgz 22%25 |***** | 6937
Installing base70.tgz 23%25 |***** | 7257
Installing base70.tgz 24%25 |****** | 7449
Installing base70.tgz 25%25 |****** | 7769
Installing base70.tgz 26%25 |****** | 8128
Installing base70.tgz 27%25 |******* | 8460
Installing base70.tgz 28%25 |******* | 8793
Installing base70.tgz 29%25 |******* | 9113
Installing base70.tgz 30%25 |******* | 9369
Installing base70.tgz 30%25 |******* | 9574
Installing base70.tgz 31%25 |******** | 9792
Installing base70.tgz 32%25 |******** | 9
Installing base70.tgz 33%25 |******** | 10
Installing base70.tgz 33%25 |******** | 10
Installing base70.tgz 34%25 |******** | 10
Installing base70.tgz 35%25 |********* | 10
Installing base70.tgz 36%25 |********* | 11
Installing base70.tgz 37%25 |********* | 11
Installing base70.tgz 39%25 |********** | 11
Installing base70.tgz 41%25 |********** | 12
Installing base70.tgz 42%25 |********** | 12
Installing base70.tgz 44%25 |*********** | 13
Installing base70.tgz 45%25 |*********** | 13
Installing base70.tgz 47%25 |************ | 14
Installing base70.tgz 49%25 |************ | 14
Installing base70.tgz 50%25 |************* | 15
Installing base70.tgz 52%25 |************* | 15
Installing base70.tgz 53%25 |************* | 16
Installing base70.tgz 55%25 |************** | 16
Installing base70.tgz 57%25 |************** | 17
Installing base70.tgz 58%25 |*************** | 17
Installing base70.tgz 60%25 |*************** | 18
Installing base70.tgz 61%25 |*************** | 18
Installing base70.tgz 63%25 |**************** | 19
Installing base70.tgz 65%25 |**************** | 19
Installing base70.tgz 66%25 |***************** | 20
Installing base70.tgz 68%25 |***************** | 20
Installing base70.tgz 70%25 |****************** | 21
Installing base70.tgz 71%25 |****************** | 21
Installing base70.tgz 73%25 |****************** | 22
Installing base70.tgz 74%25 |******************* | 22
Installing base70.tgz 76%25 |******************* | 23
Installing base70.tgz 77%25 |******************** | 23
Installing base70.tgz 79%25 |******************** | 24
Installing base70.tgz 80%25 |******************** | 24
Installing base70.tgz 82%25 |********************* | 24
Installing base70.tgz 84%25 |********************* | 25
Installing base70.tgz 85%25 |********************** | 25
Installing base70.tgz 87%25 |********************** | 26
Installing base70.tgz 88%25 |********************** | 26
Installing base70.tgz 90%25 |*********************** | 27
Installing base70.tgz 92%25 |*********************** | 27
Installing base70.tgz 93%25 |************************ | 28
Installing base70.tgz 95%25 |************************ | 28
Installing base70.tgz 97%25 |************************* | 29
Installing base70.tgz 98%25 |************************* | 29
Installing base70.tgz 98%25 |************************* | 29
Installing base70.tgz 99%25 |************************* | 30
Installing base70.tgz 99%25 |************************* | 30
Installing base70.tgz 100%25 |**************************| 30
2 MB 01:21
Extracting etc.tgz 0%25 | |
Extracting etc.tgz 100%25 |**************************| 24
6 KB 00:00
Installing comp70.tgz 0%25 | |
Installing comp70.tgz 2%25 | | 217
Installing comp70.tgz 5%25 |* | 435
Installing comp70.tgz 9%25 |** | 665
Installing comp70.tgz 12%25 |*** | 908
Installing comp70.tgz 16%25 |**** | 1177
Installing comp70.tgz 19%25 |**** | 1446
Installing comp70.tgz 23%25 |***** | 1715
Installing comp70.tgz 27%25 |******* | 1984
Installing comp70.tgz 30%25 |******* | 2252
Installing comp70.tgz 34%25 |******** | 2508
Installing comp70.tgz 37%25 |********* | 2764
Installing comp70.tgz 41%25 |********** | 3046
Installing comp70.tgz 45%25 |*********** | 3353
Installing comp70.tgz 49%25 |************ | 3609
Installing comp70.tgz 53%25 |************* | 3916
Installing comp70.tgz 58%25 |*************** | 4249
Installing comp70.tgz 62%25 |**************** | 4582
Installing comp70.tgz 66%25 |***************** | 4889
Installing comp70.tgz 70%25 |****************** | 5145
Installing comp70.tgz 75%25 |******************* | 5478
Installing comp70.tgz 79%25 |******************** | 5785
Installing comp70.tgz 83%25 |********************* | 6118
Installing comp70.tgz 86%25 |********************** | 6348
Installing comp70.tgz 89%25 |*********************** | 6515
Installing comp70.tgz 90%25 |*********************** | 6643
Installing comp70.tgz 93%25 |************************ | 6796
Installing comp70.tgz 95%25 |************************ | 6950
Installing comp70.tgz 97%25 |************************* | 7091
Installing comp70.tgz 99%25 |************************* | 7257
Installing comp70.tgz 100%25 |**************************| 7300
2 KB 00:29
Installing man70.tgz 0%25 | |
Installing man70.tgz 35%25 |********* | 268
Installing man70.tgz 60%25 |*************** | 460
Installing man70.tgz 79%25 |******************** | 601
Installing man70.tgz 100%25 |**************************| 758
0 KB 00:03
Installing game70.tgz 0%25 | |
Installing game70.tgz 100%25 |**************************| 274
3 KB 00:00
Installing xbase70.tgz 0%25 | |
Installing xbase70.tgz 5%25 |* | 281
Installing xbase70.tgz 11%25 |** | 601
Installing xbase70.tgz 14%25 |*** | 780
Installing xbase70.tgz 19%25 |**** | 1049
Installing xbase70.tgz 25%25 |****** | 1408
Installing xbase70.tgz 32%25 |******** | 1766
Installing xbase70.tgz 39%25 |********** | 2124
Installing xbase70.tgz 45%25 |*********** | 2457
Installing xbase70.tgz 50%25 |************* | 2752
Installing xbase70.tgz 55%25 |************** | 3046
Installing xbase70.tgz 60%25 |*************** | 3289
Installing xbase70.tgz 65%25 |**************** | 3558
Installing xbase70.tgz 69%25 |***************** | 3788
Installing xbase70.tgz 74%25 |******************* | 4032
Installing xbase70.tgz 79%25 |******************** | 4313
Installing xbase70.tgz 83%25 |********************* | 4531
Installing xbase70.tgz 87%25 |********************** | 4774
Installing xbase70.tgz 93%25 |************************ | 5068
Installing xbase70.tgz 97%25 |************************* | 5299
Installing xbase70.tgz 100%25 |**************************| 5440
8 KB 00:19
Extracting xetc.tgz 0%25 | |
Extracting xetc.tgz 100%25 |**************************| 707
0 00:00
Installing xshare70.tgz 0%25 | |
Installing xshare70.tgz 31%25 |******** | 140
Installing xshare70.tgz 45%25 |*********** | 204
Installing xshare70.tgz 74%25 |******************* | 332
Installing xshare70.tgz 100%25 |**************************| 449
4 KB 00:03
Installing xfont70.tgz 0%25 | |
Installing xfont70.tgz 15%25 |*** | 345
Installing xfont70.tgz 35%25 |********* | 806
Installing xfont70.tgz 48%25 |************ | 1113
Installing xfont70.tgz 64%25 |**************** | 1472
Installing xfont70.tgz 76%25 |******************* | 1753
Installing xfont70.tgz 95%25 |************************ | 2188
Installing xfont70.tgz 100%25 |**************************| 2296
5 KB 00:06
Installing xserv70.tg100 24545 100 24545 0 0 56249 0 --:--:-- --:--:-- --:--:-- 584k
z 0%25 | |
Installing xserv70.tgz 16%25 |**** | 332
Installing xserv70.tgz 32%25 |******** | 640
Installing xserv70.tgz 48%25 |************ | 960
Installing xserv70.tgz 61%25 |*************** | 1203
Installing xserv70.tgz 78%25 |******************** | 1536
Installing xserv70.tgz 92%25 |*********************** | 1817
Installing xserv70.tgz 100%25 |**************************| 1965
9 KB 00:06
Location of sets? (cd0 disk http nfs or 'done') [done]
Saving configuration files... done.
Making all device nodes... done.
Relinking to create unique kernel... done.
CONGRATULATIONS# Your OpenBSD install has been successfully co
mpleted!
When you login to your new system the first time, please read
your mail
using the 'mail' command.
Exit to (S)hell, (H)alt or (R)eboot? [reboot] syncing disks...
done
vmmci0: powerdown
rebooting...
Using drive 0, partition 3.
Loading......
probing: pc0 com0 mem[638K 1022M a20=on]
disk: hd0+
>> OpenBSD/amd64 BOOT 3.53
\
com0: 115200 baud
switching console to com0
>> OpenBSD/amd64 BOOT 3.53
boot>
booting hd0a:/bsd: 14746904+3367952+348800+0+1167360 [1065252+
128+1163832+876369]=0x15b1738
entry point at 0xffffffff81001000
[ using 3106616 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All righ
ts reserved.
Copyright (c) 1995-2021 OpenBSD. All rights reserved. https:/
/www.OpenBSD.org
OpenBSD 7.0 (GENERIC) #224: Thu Sep 30 14:13:34 MDT 2021
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/
GENERIC
real mem = 1056948224 (1007MB)
avail mem = 1009053696 (962MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf3f40 (10 entries)
bios0: vendor SeaBIOS version "1.11.0p3-OpenBSD-vmm" date 01/0
1/2011
bios0: OpenBSD VMM
acpi at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Xeon(R) CPU E5-2630 0 @ 2.30GHz, 2301.78 MHz, 0
6-2d-07
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,SEP,PGE,CMOV,PAT,PSE36,CF
LUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,CX16,SSE4.1,SSE4.2,PO
PCNT,AES,XSAVE,AVX,HV,NXE,PAGE1GB,LONG,LAHF,ITSC,MD_CLEAR,MELT
DOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
cpu0: using VERW MDS workaround
pvbus0 at mainbus0: OpenBSD
pvclock0 at pvbus0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00
virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" rev 0x0
0
viornd0 at virtio0
virtio0: irq 3
virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Network" rev
0x00
vio0 at virtio1: address f8:67:d3:c4:66:35
virtio1: irq 5
virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Storage" rev
0x00
vioblk0 at virtio2
scsibus1 at vioblk0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, >
sd0: 20480MB, 512 bytes/sector, 41943040 sectors
virtio2: irq 6
virtio3 at pci0 dev 4 function 0 "Qumranet Virtio SCSI" rev 0x
00
vioscsi0 at virtio3: qsize 128
scsibus2 at vioscsi0: 1 targets
cd0 at scsibus2 targ 0 lun 0: <OpenBSD, VMM CD-ROM, 001> remov
able
virtio3: irq 7
virtio4 at pci0 dev 5 function 0 "OpenBSD VMM Control" rev 0x0
0
vmmci0 at virtio4
virtio4: irq 9
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
com0: console
dt: 445 probes
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (b8a4714aab650659.a) swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/sd0a (b8a4714aab650659.a): file system is clean; not chec
king
/dev/sd0k (b8a4714aab650659.k): file system is clean; not chec
king
/dev/sd0d (b8a4714aab650659.d): file system is clean; not chec
king
/dev/sd0f (b8a4714aab650659.f): file system is clean; not chec
king
/dev/sd0g (b8a4714aab650659.g): file system is clean; not chec
king
/dev/sd0h (b8a4714aab650659.h): file system is clean; not chec
king
/dev/sd0j (b8a4714aab650659.j): file system is clean; not chec
king
/dev/sd0i (b8a4714aab650659.i): file system is clean; not chec
king
/dev/sd0e (b8a4714aab650659.e): file system is clean; not chec
king
pf enabled
starting network
reordering libraries: done.
openssl: generating isakmpd/iked RSA keys... done.
ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
running rc.firsttime
Path to firmware: http://firmware.openbsd.org/firmware/7.0/
Installing: intel-firmware
^Cstarting local daemons: cron.
Tue Oct 26 10:03:42 EDT 2021
OpenBSD/amd64 (username.host.thunderirc.net) (tty00)
login: root
Password:
OpenBSD 7.0 (GENERIC) #224: Thu Sep 30 14:13:34 MDT 2021
Welcome to OpenBSD: The proactively secure Unix-like operating
system.
Please use the sendbug(1) utility to report bugs in the system
.
Before reporting a bug, please try to reproduce it with the la
test
version of the code. With bug reports, please try to ensure t
hat
enough information to reproduce the problem is enclosed, and i
f a
known fix for it exists, include that as well.
You have mail.
username# crontab -e
#
SHELL=/bin/sh
PATH=/bin:/sbin:/usr/bin:/usr/sbin
HOME=/var/log
#
#minute hour mday month wday [flags] command
#
# rotate log files every hour, if necessary
0 * * * * /usr/bin/newsyslog
# send log file notifications, if necessary
#1-59 * * * * /usr/bin/newsyslog -m
#
# do daily/weekly/monthly maintenance
30 1 * * * /bin/sh /etc/daily
30 3 * * 6 /bin/sh /etc/weekly
30 5 1 * * /bin/sh /etc/monthly
#~ * * * * /usr/libexec/spamd-set
up
@reboot /usr/bin/tmux new -d 'while true; do /sbin/ping -i5 38
.87.162.1; done'\; * * -ns rpki-client -v &&
~
~
File modified since last complete write; write or use # to ove
:q
crontab: installing new crontab
username# @reboot /usr/bin/tmux new -d 'while true; do /sbin/ping
username# /usr/bin/tmux new -d 'while true; do /sbin/ping -i5 38.
username# tmux ae'\>
PING 38.87.162.1 (38.87.162.1): 56 data bytes
64 bytes from 38.87.162.1: icmp_seq=0 ttl=255 time=1.103 ms
PING 38.87.162.1 (38.87.162.1): 56 data bytes
64 bytes from 38.87.162.1: icmp_seq=0 ttl=255 time=1.103 ms
64 bytes from 38.87.162.1: icmp_seq=1 ttl=255 time=0.628 ms
64 bytes from 38.87.162.1: icmp_seq=2 ttl=255 time=20.692 ms
64 bytes from 38.87.162.1: icmp_seq=3 ttl=255 time=0.599 ms
[0] 0:ping* "username.host.thunderir
c" 10:10 26-Oct-21
[detached (from session 0)]
username# ssh-keygen -E md5 -lf /etc/ssh/ssh_host_dsa_key.pub
1024 MD5:f1:6d:f7:c4:fc:be:29:e8:5d:b9:be:9f:b5:8e:fb:3f root@
username.host.thunderirc.net (DSA)
username# ssh-keygen -E md5 -lf /etc/ssh/ssh_host_ecdsa_key.pub
256 MD5:9e:19:f2:7c:42:e3:f9:2f:3f:37:50:ff:a9:fd:e2:e9 root@m
elfa.host.thunderirc.net (ECDSA)
username# ssh-keygen -E md5 -lf /etc/ssh/ssh_host_ed25519_key.pub
256 MD5:62:2c:81:73:58:4c:67:e6:18:61:f8:63:5e:e6:38:76 root@m
elfa.host.thunderirc.net (ED25519)
username# ssh-keygen -E md5 -lf /etc/ssh/ssh_host_rsa_key.pub
3072 MD5:c1:68:3e:c4:45:1e:5a:4e:10:a8:73:6b:48:12:df:66 root@
username.host.thunderirc.net (RSA)
username# ssh-keygen -lf /etc/ssh/ssh_host_dsa_key.pub
1024 SHA256:IXmAJAIdZC86j0R9QjE34xd/BBZYbwF5+awvzMpvjyE root@m
elfa.host.thunderirc.net (DSA)
username# ssh-keygen -lf /etc/ssh/ssh_host_ecdsa_key.pub
256 SHA256:6Q8iFOnyPAgikH1uBA7e24blVLwY8B+7NSIAxc6Wqlk root@me
lfa.host.thunderirc.net (ECDSA)
username# ssh-keygen -lf /etc/ssh/ssh_host_ed25519_key.pub
256 SHA256:GGCJN9QEJGxFA6rM9eWyqKMYTWclj0xbv3g1xz/y4Zc root@me
lfa.host.thunderirc.net (ED25519)
username# ssh-keygen -lf /etc/ssh/ssh_host_rsa_key.pub
3072 SHA256:fFyz8lcRkP0Euza+S90wbyAdDRRXki3iF+j+DNLzjdc root@m
elfa.host.thunderirc.net (RSA)
username#
echo "@reboot /usr/bin/tmux new -d 'while true; do /sbin/pin
g -i5 38.87.162.1; done' \;" >> /var/cron/tabs/root
/usr/bin/tmux new -d 'while true; do /sbin/ping -i5 38.87.16
2.1; done' \;
1024 MD5:77:9a:c8:2f:34:1d:56:2e:a1:07:42:c0:c7:ce:ee:b5 roo
t@username.host.thunderirc.net (DSA)
256 MD5:f0:54:35:63:78:82:31:90:72:8d:de:84:0d:45:06:4c root
@username.host.thunderirc.net (ECDSA)
256 MD5:b1:22:7f:1f:00:92:9a:0d:00:da:4f:85:00:2e:2f:ab root
@username.host.thunderirc.net (ED25519)
3072 MD5:a1:e9:a6:99:b5:1b:4b:bd:fa:2b:5d:a7:7b:59:70:57 roo
t@username.host.thunderirc.net (RSA)
1024 SHA256:OKiReau1PTeTgD2ttInI6TUYi/MqLx5Q3OVTmWUKbE8 root
@username.host.thunderirc.net (DSA)
256 SHA256:+NvGOkgfWN39Hspmugsd2PyPwrehEqsD9qXu0dfl14U root@
username.host.thunderirc.net (ECDSA)
256 SHA256:hag6/gJDg/ORNptEMM6yVz4qePHw30Zl/ZKPWu8NCgs root@
username.host.thunderirc.net (ED25519)
3072 SHA256:At2JRcwCVDC9Wirs7CCWvCtML2ZLB9hW08dbCS4OCAQ root
@username.host.thunderirc.net (RSA)